Most LPG accidents start the same quiet way.
A pot boils over, a burner blows out, a fitting loosens — gas keeps flowing into the room long after anyone notices.
Rubber tubing left unchanged for years cracks quietly, before it looks worn.
A nibbled pipe is one of the most common causes of kitchen gas leaks.
Spilled milk douses the burner, but the knob stays open and gas keeps flowing.
A regulator that isn't seated properly leaks slowly, before you can smell it.
One device, fitted once, watching every day after.
Reads pressure, not presence
The built-in gauge tracks live cylinder pressure, so a leak is caught by how fast pressure falls — not by smell or luck.
Cuts supply automatically
Once a leak is detected, the valve closes on its own. No app, no alarm, no one needs to be in the kitchen.
Shows your gas level
The same dial doubles as a fuel gauge, so you know a cylinder is running low before it runs out mid-meal.
Fits your existing setup
Installs between any standard cylinder valve and regulator — no new pipes, no electrician.
Built for a 25-year life
An all-brass body and a sealed gauge mechanism are made to outlast several cylinders' worth of use.
Independently certified
Tested to UL standards and manufactured under ISO 9001 quality controls.
Four steps, about two minutes, no tools.
Remove the regulator
Unscrew your existing regulator from the LPG cylinder valve.
Fit Gas Safe
Screw the Gas Safe body directly onto the cylinder in its place.
Reattach the regulator
Fix your regulator onto the free end of the Gas Safe unit.
Prime the gauge
Press the gauge dial once — the needle rises to confirm the line is live.
Pick the fit for your cylinder valve.
| Model | Valve fit | Orientation | Body |
|---|---|---|---|
| Gas Safe 22 | 22mm | Vertical | Solid brass |
| Gas Safe 27 | 27mm (most common) | Vertical / horizontal | Solid brass |
| Gas Safe 35 | 35mm | Vertical | Solid brass |
UL Listed
Certified to USA and Canadian safety standards for gas appliance fittings.
ISO 9001:2008
Manufactured under an internationally recognised quality management system.
3-year warranty
Covers manufacturing defects in the valve body and gauge mechanism.
Before you fit one
How fast does it shut off a leak?
The valve closes within seconds of detecting a pressure drop consistent with a leak, well before enough gas can accumulate to be dangerous.
Will it work with my current stove and regulator?
Yes. Gas Safe fits between the cylinder valve and your existing regulator, so your stove, pipe, and regulator all stay exactly as they are.
What happens after it shuts off — do I need to replace it?
No. Once the leak is fixed or the fitting is reseated, press the gauge dial to reset the needle and resume normal supply.
Can I use it on a horizontal cylinder valve?
The Gas Safe 27 is available in both vertical and horizontal orientations — check which your cylinder uses before ordering.
Does it save gas as well?
Indirectly, yes — by stopping slow leaks and flame-failure waste, most households see a reduction in how often they refill.
Fit it once. Stop checking twice.
Two minutes of setup, no electrician, no subscription — just a valve that watches the line for you.